Home
» Products » Aluminium Alloy
Aluminium Alloy
Aluminum alloys are alloys in which aluminum is the
predominant metal. Typical alloying elements are copper, zinc,
manganese, silicon, and magnesium. There are two principal
classifications, namely casting alloys and wrought alloys, both of which
are further subdivided into the categories heat-treatable and
non-heat-treatable. About 85% of aluminum is used for wrought products,
for example rolled plate, foils and extrusions. Cast aluminum alloys
yield cost effective products due to the low melting point, although
they generally have lower tensile strengths than wrought alloys. The
most important cast aluminum alloy system is Al-Si, where the high
levels of silicon (4-13%) contribute to give good casting
characteristics. Aluminum alloys are widely used in engineering
structures and components where light weight or corrosion resistance is
required.
The Aluminum Alloy manufactured by us have varied industrial uses. Some
of these are packaging, building and construction,transportation and
industrial applications. When it comes to reliability, and authentic
aluminum alloy the industries turn to us.
|
|
» Aluminium Alloy Bars |
 |
|
|
We manufacture a
comprehensive range of Aluminum Extruded Alloy Bars to meet
varied industrial requirements. The quality of our alloy and the
extruded bars complement each other and go through series of
tests to ascertain and maintain the unquestionable quality that
is our hall mark. Our products are designed for both interior
and exterior applications to provide years of maintenance-free
use. With significant extrusion houses and multitude of dies
available, chances are we can find an existing profile to meet
your needs. It has been our goal to meet and satisfy client
briefs and specifications.
Technical Specification
| Type of alloy |
Temper |
MM |
| Round |
Square |
FLATS WIDTH X THK |
Length max |
| 2xxx |
T4511, T3511,T651,T8 |
5-150 |
12-150 |
10-50x20-310 |
6000 |
| T4,T3,T6 |
151-300 |
151-250 |
10-150x20-400 |
6000 |
| T4,T3 |
301-350 |
251-300 |
10-250x20-400 |
2500 |
| T4,T3 |
351-380 |
301-320 |
10-300x20-400 |
2000 |
| 6xxx |
T6511 |
6-150 |
6-150 |
10-50x20-310 |
6000 |
| T6 |
151-300 |
151-301 |
10-150x20-400 |
3650 |
| T6 |
301-380 |
301-350 |
10-250x20-400 |
3000 |
| T6 |
381-400 |
351-380 |
10-300x20-400 |
2500 |
| T6 |
401-450 |
381-400 |
10-460x20-400 |
2500 |
| 7xxx |
T6511,T8 |
12-150 |
12-150 |
10-50x20-310 |
6000 |
| T6 |
151-300 |
151-350 |
10-150x20-400 |
3650 |
| T6 |
301-350 |
301-320 |
10-250x20-400 |
3000 |
| T6 |
351-400 |
321-350 |
10-300x20-400 |
2500 |
| T6 |
|
351-400 |
10-300x20-400 |
2000 |
| 5xxx |
F,O |
12-150 |
12-150 |
10-50x20-310 |
6000 |
| F, O |
151-300 |
151-301 |
10-150x20-400 |
3650 |
| F, O |
301-350 |
301-351 |
10-250x20-400 |
3650 |
|
|
|
|
|
|
We manufacture a variety
of Aluminum Alloy plates in a variety of sizes, alloys and
tempers. They have a range of processing & cutting
capabilities in order to provide the client with the size they
need. A large number of our customers want us to carry out their
first stage processing for them as this means they can focus on
their area of expertise in more skilled machining and equipment
manufacture. Our aluminum alloy plates have many industrial
uses.
Technical Specification
| Type of alloy |
Temper |
THICKNESS IN MM |
WIDTH X LENGTH IN MM |
| 2014 |
T451 |
06/01/52 |
1000-2000 x 2000-6000 |
| 2017A |
T451 |
06/01/52 |
1000-2000 x 2000-6000 |
| 5083 & 5086 |
O,H 116/321 |
06/01/52 |
1000-2300 x 2000-9000 |
| 5754 |
O,H 111 |
06/01/52 |
1000-2000 x 2000-6000 |
| 6351 |
T651 |
06/01/00 |
1000-2000 x 2000-6000 |
| 6061 |
T651 |
06/01/52 |
1000-2000 x 2000-6000 |
| 6082 |
T651 |
06/01/52 |
1000-2000 x 2000-6000 |
| 7075 |
T651 |
06/01/52 |
1000-2000 x 2000-4000 |
|
|
|
|
»
Aluminium Alloy Sheets & Coil |
 |
|
|
The Aluminum Alloy Sheets
coming from our units bear the hall mark of our excellence. Our
alloy sheet is a fully commercialized aluminum-lithium alloy
developed for high strength aerospace applications. Our alloy
offers a huge density savings when compared with other aerospace
alloys. They also have higher elastic modulus. When coupled with
the low density feature, this provides for unique weight saving
benefits. Our alloy sheets have strengths comparable with other
high strength aluminum alloys and superior corrosion resistance.
The alloy is also one of the most weldable aluminum products
available
Technical Specification
| THIN GAUGE PLAIN
SHEET |
|
|
|
|
| Alloy |
Temper |
Thickness (mm) |
Width (mm) |
Length (mm) |
| AA1050, 1060, 1070, 1080, 1100, 1200, 3003, 3004, 3005,
3105,8011,6351,6061,6082,2024 |
O,H12, H14, H16, H18,T3,T4,T651 |
0.30 -4.76 |
500 –1520 |
1830 -6000 |
| AA5005,5052,5083,5056 5086 |
O, H32, H34, H36, H38 |
0.30 -4.76 |
500 –1520 |
1830 -6000 |
| THIN GAUGE PAIN SHEET |
Temper |
Thickness (mm) |
Width (mm) |
| AA1050, 1060, 1070, 1080, 1100, 1200, 3003, 3004, 3005,
3105,8011 |
O,H12,H14, H16, H18 |
0.20 -0.29 |
500 -1220 |
| PLAIN COIL |
Temper |
Thickness (mm) |
Width (mm) |
| AA1050, 1060, 1070, 1080, 1100, 1200, 3003, 3004, 3005,
3105,8011 |
O, H12, H14, H16, H18 |
0.20 -4.0 |
40- 1550 |
|
|
|
|
| AA5005, 5052, 5086 |
O, H32, H34, H36, H38 |
0.30 -4.0 |
40 –1219 |
| Coil I.D. (mm.) Thickness (mm.) |
|
|
|
| 200 |
0.20 to 0.40 |
Foil Stock/Plain Sheets/Coils in specification other
than those mentioned can also be supplied subject to
confirmation. |
|
| 300 |
0.40 to 0.90 |
|
|
| 400/500 |
0.20 to 4.00 |
|
|
|
|
|
|
»
Aluminium Alloy Tubes & Pipes |
The Aluminum Alloy Tubes and Pipes is
another valued product from our range. Our alloy is of the right
mix and the tubes and pipes made in our units have invaluable
usage in varied industrial requirements.
Our alloy offers a huge density savings when compared with
other aerospace alloys. They also have higher elastic modulus.
When coupled with the low density feature, this provides for
unique weight saving benefits.
Technical Specification
| Type of alloy |
Temper |
Outer dia in mm |
WALL THK |
length max |
| 2xxx |
T4511 |
61 - 200 |
5 MM TO 40 MM |
6000 |
| T4 |
201- 420 |
10 MM TO 80 MM |
6000 |
| Type of alloy |
Temper |
Outer dia in mm |
WALL THK |
length max |
| 6xxx |
T6511 |
61- 200 |
5 MM TO 40 MM |
6000 |
|
06/01/20 |
1 MM TO 80 MM |
6000 |
|
|
|
|
»
Aluminium Architectural Sections & Profiles |
|
The Aluminum Architectural
Sections & Profiles from our manufacturing unit have great
use in the building and construction industry. We have been
focusing on both industrial and architectural and constructional
extrusions. We aim at providing value added products to suit our
customers' specific needs. These products are finely tampered.
They are ideal for window, door, curtain wall and other
architectural purpose Applied for window, door, curtain wall and
other architectural purpose. The surface is treated with mill
finish, anodized, powder coating or electrophoresis. They are
available in colorful and different surface treatment. Our
product is cost effective, durable and anti-corrosive. |
|
|
|
»
Aluminium Electrical & Electronics Application Profiles |
|
We manufacture a wide
array of Aluminum Electrical&Electronics Application
Profiles which are in great use in various industrial and
domestic requirements. These items pass through our stringent in
house quality checks and and other critical industrial
parameters to qualify as one of the best in the market. Since th
raw materials that go into the manufacture of these products are
top rated they do not rust and collapse even after heavy traffic
usage. They come in fine finish and are very cost effective. |
|
|
|
»
Aluminium Chequard, Troughed & Corrugated Roofing Sheets |
|
These products from our
manufacturing unit is in great demand in the building and
construction industry .They are specially required for farm
houses and factory sheds. Made from quality raw materials they
do no t rust, bend or crumble after heavy use.
| Alloy |
Temper |
Thickness |
Width |
Length |
| INDUSTRIAL TROUGHED SHEETS – Plain,
Stucco, Embossed |
|
|
|
|
| AA 3003, 3105, 8011 |
H 18 |
0.30- 1.20 |
795,920,1044 |
1500-8000 |
| Alloy |
Temper |
Thickness |
Width |
Length |
| CURROGATED SHEET (Circular ) – Plain, Stucco,
Embossed |
|
|
|
|
| AA 3003, 3105, 8011 |
H 18 |
0.30 – 1.20 |
800,950,1250 |
1500-8000 |
| Alloy |
Temper |
Thickness |
Width |
Length |
| ALUMINIUM CHEQUARD PLATES |
|
|
|
|
| 6061, 3105, 7039 |
F1 T6 |
0.56-6.00mm |
812, 1219 |
1500- 8000 |
|
|
|
|
|
|
|
We develops, manufactures
and markets value-added aluminum profiles, profile-based
building systems and heat exchanger solutions in aluminum. We
are a leading company in this field and have customers in the
building-, transport-, engineering and telecom industry. Our
products are highly rated by our customers for their superior
technology, quality control and fine finish. |
|
|
|
|
|
|
We are manufacturers of
cutting edge quality Aluminum Alloy Ingots. Our Aluminum Ingots
act as a raw material which is used in automobiles, electrical &
pressure die casting industries etc. There exist various alloys
like LM6, ALSi132 and many more with us. Furthermore, our
Aluminum Ingots are available at very nominal cost. |
|
|
|
|
|
|
Our Aluminum Grills are
in great demand in the building and construction industry. Made
from high class alloy these products come in superior finish and
pass through our stringent in house quality control to meet
critical industry parameters. Since the raw materials used is of
finest quality these grills do not rust or bend. The best
quality raw materials also ensure long life. The price like all
our products are very customer friendly. .
| DESIGN NO. |
STD Size NO.1 (7.5mm) |
STD Size NO.2
(7.5mm) |
STD Size NO.3(10mm) |
STD ISD NO.4(10mm) |
| w(mm)L(mm) |
w(mm)L(mm) |
w(mm)L(mm) |
w(mm)L(mm) |
DG-102
DG-104
DG-916
DG-112
DG-107
DG-124
DG-103
DG-117 |
895*3930
1275*3550
965*4000
760*4165
970*3320
640*3970
1085*4050
1000*4210 |
740*3875
1040*3575
790*3970
630*4130
790*3320
520*4020
900*3990
835*4155 |
780 *3930
1100*3660
790 *4120
675*4125
850 *3360
600*3830
980 *3940
890*4180 |
930*3950
1290*3725
935*4150
805*4140
1020*3360
655*4045
1160*4000
1030*4240 |
|
|
|
|
©
Metal Industries. All Rights Reserved (Terms
of Use)
